Page 1 of 1

ctrlV test version 3

Posted: Tue Feb 23, 2016 3:49 am
by ctrlv
more Tests in the new Test your 3D printer! version 3.

new features

- Z-Height Check
- Warp
- Spike
- Hole in wall
- Raft Test
- more Overhang Steps 50° - 70°

This is a hard to print testfile!
often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff.

does your printer challenge this ultimative part?
check it out and get (almost) instant results.

these test are included in this very tiny file:

- 01 Nut Size M4 Nut should fit perfectly
- 02 Wave rounded print
- 03 Star Sharp Edges
- 04 Name Complex Shapes
- 05 Holes Hole Size 3, 4, 5 mm
- 06 minimal Distance 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm
- 07 Z height 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1 mm
- 08 Wall Thickness 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm
- 09 Bridge Print 2, 4, 8, 16 mm
- 10 Sphere Rounded Print 4.8mm height
- 11 Sphere Mix 7 mm height
- 12 Pyramide 7 mm height
- 13 Overhang 25, 30, 35, 40, 45, 50, 55, 60, 65, 70°
- 14 Warp does it bend?
- 15 3D Print Font optimized for 3D printing
- 16 Surface Flatness
- 17 Size 100 x 100mm x 23.83 (10mm width)
- 18 Spike minimum Layer Time 21 mm height from Bottom (include Baseplate)
- 19 Hole in Wall 4 mm diameter, check for proper print
- 20 Raft Test raft should be just under the model
- 21 Retract Travel check retract settings for longer travel

version 1 http://www.thingiverse.com/thing:704409
version 2 http://www.thingiverse.com/thing:1019228
version 3 http://www.thingiverse.com/thing:1363023

testIII.jpg


v3_thingiverse_img.jpg