ctrlV test version 2

This is a hard to print testfile!
often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff.
User avatar
ctrlv
Site Admin
Posts: 30
Joined: Wed Sep 16, 2015 9:09 pm

ctrlV test version 2

Postby ctrlv » Thu Sep 17, 2015 12:23 am

after a lot of demands and wishes we present the new smaller testfile!
this saves 75% volume and its only 2.52cm3.

print this with 0.1mm layerheight and 33% infill.
extrusion width: 0.48mm

test_1000x1000.jpg


This is a hard to print testfile!
often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff.

does your printer challenge this ultimative part?
check it out and get (almost) instant results.

these test are included in this tiny file:

size: the object is 2x50x30mm (baseplate)
hole size: 3 holes (3/4/5mm)
Nut size: M4 Nut should fit perfectly
fine details: pyramide, cone, all numbers
rounded print: wave, half sphere
minimum distance & walls: 0.1/0.2/0.3/0.4/0.5/0.6/0.7mm
overhang: 25°/30°/35°/40°/45°
bridge print: 2/4/8/16/mm
surface: all the flat parts
Attachments
Test your 3D printer_v2_0.48mm.stl
(3.57 MiB) Downloaded 228 times
just print it!

Return to “Version 2”